Signs That Your Brakes Need an Upgrade

Keeping your brakes in good working condition is important not only for preventing stress and strain on your car, but also for your protection.

Every time you stop, you cause a small amount of wear to your brake pads. This builds up over time, and the pads become thinner. That suggests you’ll have to substitute them ultimately, or you won’t be able to brake as effectively, putting you and your passengers, as well as other vehicles, in danger. Furthermore, worn pads can cause damage to your rotor blades and other vehicle components.

But how would you know when it’s time to replace your brake pads? Check out these warning signs and keep them in mind while you’re driving.

Grinding and Squealing

When you hit your brakes, have you ever experienced a high-pitched screeching sound? Screeching or squealing indicates that the brake pads are worn and need to be replaced.

This obnoxious sound is produced by the metallic shim, which acts as an alarm sound as the brake pads wear away. If you regularly hear squeaking when you brake, get your brakes checked. Deep, low scraping sounds may indicate that your pads have deteriorated away to the point of metal-on-metal interaction. This can cause serious damage to your car, so if you hear this noise, have your brakes tested right away.

Visible Signs

Examining the brakes is one way to determine their state. By looking through the spokes of your tires, you should be able to see your brake pad pushed against the steel rotor. If your pads are smaller than a quarter inch (approximately 3mm), it’s time to change them.

An alert light on your dashboard is yet another visual cue to watch for. Some cars have a detector on the brake pads that alert you when they need to be replaced. If your brake light illuminates, consult with your mechanic to determine when it is time to repair your brakes.

Response time

If your brakes don’t sound like they’re reacting well when you put your foot down, get them checked out. This is referred to as “brake fade,” and it occurs as the brakes weigh away and become less effective in the long run.

If you notice the pedal slipping into the floor or if you have to push it all the way down until your brakes activate, your brake fluid can be leaking. When your vehicle is stopped, keep an eye out for a shallow puddle of fluid on the pavement, which could mean a leak. This issue may be triggered by an air leak in the hydraulic pump, or the brake kit could need to be replaced.

If you want to get your big brake kits Australia has many online stores and dedicated spare part shops you can check out.

Vibrating or Pulling

If you detect a difference in the feel of your brakes, it’s a warning that they need to be serviced.

If your car pulls to one side when you stop, it means your brakes are worn unevenly. They might need to be adjusted or replaced, so get them tested by a mechanic.

Similarly, if your brake pedals or steering wheel buzzes when you slow down, it’s necessary to get your brakes checked. When your pads wear, the resin in them will smear on the rotor, which, if done unevenly, can cause your pedal to vibrate or shake as you click on it. This problem may also mean that your brake pads need to be replaced.